The Differences Between Manual Rebar Benders And Automatic Rebar Benders

Rebar is one of the more common products that is found at a construction site. It is used in the construction of foundations, specifically used in the cement. It can also serve many other purposes in the process of construction, especially if it is bent into specific configurations. There are specific machines that are made to been the rebar, and these can be either manual or automatic. Those that are manual require individuals to use their own strength in order to cut through the rebar, which can be problematic and sometimes unsafe. There are automatic Rebar Benders that are often preferred simply because they are much more productive, and also lessen the potential for injuries and mistakes made in the bending process.

Overview Of Manual Rebar Benders

These are tools that are used on the ground. The rebar is inserted into the device and there are separate bars that are bent to bend the metal. The rebar bender can bend the metal to virtually any angle, usually going up to about 90? Some of them will go further, and there are many that are constructed very well, requiring very little physical effort on the part of the user. However, getting the angle just right is usually the most problematic aspect of using these manual ones which is why the automated ones are often used on larger construction sites across the nation.

Overview Of Automatic Rebar Benders

These machines are so useful when it comes to high levels of production where thousands of pieces of rebar are needing to be produced. Not only do they bend at certain angles, but they can also craft the metal into different shapes if necessary. If you have ever seen machines that are able to create stirrups, they work with the same type of principle. They use either electric or hydraulic power, and because they are fully automated and programmable, each piece that is created will be identical to the one right before it. This means that you can sell these products and never have to worry about the person purchasing complaining about misalignments simply because it’s not going to happen. There is a price difference between the manual and automated versions of these machines, and places that you can get great deals.

Price Differences Between The Two

The main difference between the two, other than accuracy and safety levels, is the speed at which the rebar can be bent. Although it may only take less than a minute for a person to use a manual rebar the automated ones can do this within seconds. This is very beneficial, especially if you are working with a spool of rebar and producing hundreds or thousands of pieces every day. This will eliminate the probability of workers getting hurt or overworked using the manual devices, plus your production levels, and accuracy levels, will always be at their highest points.

Even if you do want to have a backup manual rebar bender, it is always recommended that you have at least one automated one that is doing most of the work for you. This is simply necessary if you are in charge of large projects where concrete is being used, or if you are providing the rebar for a multitude of construction businesses in your area that need to have thousands of pieces produced on a regular basis. As one of the most professional rebar processing machine manufacturers in China, Ellsen can meet your demands to improve profits. You can click here http://ellsenrebarprocessingmachine.com/ to know more.